back
print page
Jointing cutter Diamaster WhisperCut
ID: 192217
  • Measurement:

    DP:100x51x30 DKN,Z3x6

  • Application:

    For tear-free and low noise jointing of workpiece edges side with and against feed (jump cutting).

  • Machine:

    Edgebanding machines, copy shaping machines, double-end tenoners etc.

  • Workpiece material:

    Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).

  • Technical information:

    DP tipped cutterhead with alternate shear angle for tear-free jointing edges and cutting surfaces. Tool with knife arrangement S can be used left and right and produces hollow cut for tightly closing edgebanding. Low noise design with up to 5 dB(A) noise reduction and highly efficient chip collection (>95%) by DFC. Significant weight reduction by using an aluminium alloy tool body. Carrier body for multiple use with exchangeable knives. 0.6 mm resharpening area.

AttributeValue

Classification 

WM 230 2 01

Product type 

Cutter with bore

Cutting material 

DP

Diameter (mm)

100

Cutting width (mm)

51

Thickness of hub (mm)

60

Bore diameter / interface (mm)

30 DKN

Position of hub 

3

Number of teeth 

3x6

Workpiece material 

Plastics
Board, coated
Board, uncoated
Composites

Maximum RPM (min-1)

15300

Type 

AS°

Rotation 

LH

Knife type 

12xB
3xB1
3xB2

Knife (Type)

12xB 3xB1 3xB2

Make of machine 

SCM, Stefani

Stock availability 

available from stock
Plastics
Board, coated
Board, uncoated
Composites
available from stock
available at short notice