back
print page
Jointing cutter Diamaster WhisperCut
ID: 192246
  • Measurement:

    DP, 100x124x30 DKN8x38 Z2x11

  • Application:

    For tear-free and low noise jointing of workpiece edges side with and against feed (jump cutting).

  • Machine:

    Edgebanding machines, copy shaping machines, double-end tenoners etc.

  • Workpiece material:

    Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).

  • Technical information:

    DP tipped cutterhead with alternate shear angle for tear-free jointing edges and cutting surfaces. Tool with knife arrangement S can be used left and right and produces hollow cut for tightly closing edgebanding. Low noise design with up to 5 dB(A) noise reduction and highly efficient chip collection (>95%) by DFC. Significant weight reduction by using an aluminium alloy tool body. Carrier body for multiple use with exchangeable knives. 0.6 mm resharpening area.

AttributeValue

Classification 

WM 230 2 01

Product type 

Cutter with bore

Cutting material 

DP

Diameter (mm)

100

Cutting width (mm)

124

Thickness of hub (mm)

96

Bore diameter / interface (mm)

30 DKN

Position of hub 

2

Number of teeth 

2x11

Workpiece material 

Plastics
Board, coated
Board, uncoated
Composites

Maximum RPM (min-1)

15300

Type 

AS

Rotation 

RH

Knife type 

22xA

Knife (Type)

22xA

Make of machine 

Fravol
Plastics
Board, coated
Board, uncoated
Composites
available from stock
available at short notice