back
print page
Jointing cutter Diamaster PLUS
ID: 192057
  • Measurement:

    DP:180x43x35 DKN,Z6x4

  • Application:

    For tear-free jointing with and against feed (e.g. jump cutting).

  • Machine:

    Edgebanding machines and double-end tenoners.

  • Workpiece material:

    Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).

  • Technical information:

    Tool with large, alternate shear angle for tear-free edges and straight jointed edge. 4.0 mm resharpening area.

AttributeValue

Classification 

WF 230 2

Product type 

Cutter with bore

Cutting material 

DP

Diameter (mm)

180

Cutting width (mm)

43

Thickness of hub (mm)

46

Bore diameter / interface (mm)

35 DKN

Position of hub 

1

Number of teeth 

6x5

Workpiece material 

Plastics
Board, coated
Board, uncoated
Composites

Maximum RPM (min-1)

9500

Type 

AS

Rotation 

RH

Make of machine 

Homag, IMA

Recommended feed rate for 6000 min-1 for veneered or coated particle and fibre materials.
Z=4 25 m min-1
Z=6 35 m min-1
Z=8 45 m min-1
Z=10 55 m min-1
Z=12 65 m min-1
Z=14 80 m min-1

Plastics
Board, coated
Board, uncoated
Composites
available from stock
available at short notice