back
HeliCut cutterhead swivelling
ID: 024264
  • Measurement:

    HW:150x57x40,Z1+1

  • Application:

    For jointing and bevelling with adjustable bevel angle.

  • Mashine:

    Spindle moulders, moulders, edgebanding machines and double-end tenoners.

  • Workpiece material:

    Softwood and hardwood, laminated veneer lumber, plastomers, technical foams (XPS, PU), limited suitable for MDF and chipboard (uncoated or coated).

  • Technical information:

    Knife holder swivelling adjustable from 0 - 65°. Quick and easy angle adjustment of common angles (15°, 30°, 45°, 60°) by additional locking positions in 15° steps. Workpiece edges tear-free on both sides due to alternatinv shear angles. Economical due to partial change of tungsten carbide turnblades with four cutting edges. Cutting edges with particularly sleek geometry and polishing for perfect surface quality and long performance time. Noice reduced design with split cutting edges and optimized gullet design for improved chip removal.

PropertyValue

Classification 

WW 430 1 05

Product type 

Cutter / Cutterhead

Cutting material 

HW

Diameter (mm)

150

Cutting width (mm)

55

Bore diameter (mm)

40

Maximum bore diameter (mm)

40

Number of teeth 

1/1

RPM (min-1)

5000

RPM to (min-1)

9000

Swivel range (°)

0 - 65

Stock availability 

available at short notice
available from stock
available at short notice