back
WhisperCut cutterhead swivelling
ID: 024291
  • Measurement:

    HW:150x57x30,Z1+1

  • Application:

    For jointing and bevelling with adjustable bevel angle.

  • Mashine:

    Spindle moulders, moulders, edgebanding machines and double-end tenoners.

  • Workpiece material:

    Hardwood, chip and fibre board (chipboard, MDF, HDF etc.), plastic coated, veneered etc., laminated veneer lumber (plywood, multiplex plywood etc.), solid surface material (e.g. Corian®, Varicor® etc.), fibre reinforced plastics (e.g. GRP, CFRP).

  • Technical information:

    Knife holder swivelling adjustable from 0 - 65°. Quick and easy angle adjustment of common angles (15°, 30°, 45°, 60°) by additional locking positions in 15° steps. Workpiece edges tear-free on both sides due to alternatinv shear angles. Economical due to partial change of diamond cutting edges. Noice reduced design with optimized gullet design for improved chip removal.

PropertyValue

Classification 

WW 430 1 05

Product type 

Cutter / Cutterhead

Cutting material 

DP

Diameter (mm)

150

Cutting width (mm)

55

Bore diameter (mm)

30

Maximum bore diameter (mm)

40

Number of teeth 

1/1

RPM (min-1)

5000

RPM to (min-1)

9000

Swivel range (°)

0 - 65

Stock availability 

available from stock
available from stock
available at short notice