Workpiece material: Plastic coated chipboard
Operation: Sizing / Nesting
RPM: n = 24000 min-1
Correction factor for vf: MDF = 0.8; Chipboard uncoated = 1.1;
Veneer across grain = 0.7;
Pre trimming MDF = 1.2
Minimum grooving depth ap min for tear-free cut
- Measurement:
DP/D12/NL24/GL70/S12x42/RH/Z2+2
- Application:
Router cutter for sizing and grooving (Nesting) at high feed speeds. For tear free cut edges on both sides of the workpiece.
- Machine:
Overhead routers with/without CNC control, machining centres, special routers with spindles for mounting shank tools.
- Workpiece material:
Chipboard and fibre materials (MDF, HDF etc.), uncoated, plastic coated, veneered etc., laminated veneer lumber (plywood, multiplex plywood etc.).
- Technical information:
Spiral cutting edge arrangement with alternate shear angle and real - Z 2 over the complete cutting length, with DP plunging tip. Resharpenable up to 3 times with normal wear. Tool body made from high-tensile material. Important to follow the application data parameters. Tools with increased length of positive shear angle for optimized chip collection in the direction of the extraction hood – Leitz DFC®.
| Attribute | Value |
|---|---|
Classification | WO 140 2 50 |
Product type | Cutter with shank |
Cutting material | DP |
Diameter (mm) | 12 |
Total length (mm) | 70 |
Cutting length (mm) | 24 |
Shank dimension (mm) | 12x42 |
Shank / Interface (mm) | 12 |
Number of teeth | 2+2 |
Workpiece material | Plastics Mineral materials Non-ferrous metals Board, coated Board, uncoated Composites |
Rotation | RH |
Minumum cutting depth (mm) | 14 |
Stock availability | available from stock |
RPM:
n = 18000 - 24000 min-1