back
print page
Circular sawblade AS OptiCut UT Diamaster PLUS
ID: 190743
  • Measurement:

    DP:300x4.3/5.1x30,Z48,KON

  • Application:

    For scoring with feed.

  • Machine:

    Panel sizing saws with scoring unit and pressure beam.

  • Workpiece material:

    Chipboard and fibre materials paper and plastic coated, veneered, laminated veneer lumber (e.g. plywood, multiplex plywood), alu composite panels (e.g. Alucobond®), duroplastics (compact laminate panels, e.g. HPL), fibre reinforced materials (e.g. GFRP, CFRP)

  • Technical information:

    Scoring depth 2.00 - 2.50 mm. Recommended especially for use in plastic and HPL-coated panels. Long tool life due to DP tipping. The suitable circular scoring sawblade must be selected depending on the cutting width of the main saw. Can be used in combination with HW- and DP-tipped main circular sawblades. The cutting width (SB) of the scoring circular sawblades is 0.1 mm less for use in combination with resharpened TC-tipped main circular sawblades.

AttributeValue

Classification 

WK 804 2

Product type 

Circular sawblade

Cutting material 

DP

Diameter (mm)

300

Cutting width (mm)

4,3

Thickness of tool (mm)

3,5

Bore diameter / interface (mm)

30

Pinhole dimensions (mm)

2/11/73 2/13/94

Number of teeth 

48

Tooth shape 

KON/FZ

Cutting angle (°)

10

Workpiece material 

Board, coated
Board, uncoated
Composites
Plastics

Maximum RPM (min-1)

7600

Make of machine 

Schelling

Stock availability 

available from stock
Board, coated
Board, uncoated
Composites
Plastics
available from stock
available at short notice