back
print page
WhisperCut PLUS EdgeExpert
ID: 192256
  • Measurement:

    DP, 125x43x30 DKN8x38 Z3

  • Application:

    For tear-free and noise reduced jointing of workpiece cutting surfaces with and against feed (jump cutting) particularly for sensitive decorative papers, foil coatings and veneers.

  • Machine:

    Edgebanding machines, copy shaping machines, double-end tenoners etc.

  • Workpiece material:

    Chip and fibre boards (MDF etc.) raw, veneered, painted and coated; especially for plastic, paper, HPL and anti-fingerprint coatings. Also suitable for surfaces in mat, high gloss or with relief structures.

  • Technical information:

    DP tipped cutterhead with alternate shear angle for tear-free jointing edges and cutting surface. Increased shear angle for excellent edge quality on sensitive decorative papers, foil coatings and veneers. Tool with knife arrangement S can be used lefthand and righthand and produces a hollow cut for tightly fitting edgebanding. Noise reduced design with up to 5 dB(A) noise reduction and highly efficient chip collection (>95%) through DFC. Significant weight reduction by using an aluminium alloy tool body. Carrier body for multiple use with exchangeable knives. 3.1 mm resharpening area.

AttributeValue

Classification 

WM 230 2 02

Product type 

Cutter with bore

Cutting material 

DP

Diameter (mm)

125

Cutting width (mm)

43

Thickness of hub (mm)

40

Bore diameter / interface (mm)

30 DKN

Position of hub 

2

Number of teeth 

3x6

Workpiece material 

Plastics
Board, coated
Board, uncoated
Composites

Maximum RPM (min-1)

13700

Type 

AS

Rotation 

LH

Make of machine 

IMA

Stock availability 

available from stock
Plastics
Board, coated
Board, uncoated
Composites
available from stock
available at short notice