back
print page
HeliCut cutterhead swivelling
ID: 024262
  • Measurement:

    HW:150x57x31,75,Z1+1

  • Application:

    For jointing and bevelling with adjustable bevel angle.

  • Machine:

    Spindle moulders, moulders, edgebanding machines and double-end tenoners.

  • Workpiece material:

    Softwood and hardwood, laminated veneer lumber, plastomers, technical foams (XPS, PU), limited suitable for MDF and chipboard (uncoated or coated).

  • Technical information:

    Knife holder can be swivelled steplessly on both sides from 0 - 65°. Quick and easy adjustment of conventional angles (15°, 30°, 45°, 60°) due to additional locking positions in 15° steps. Design with divided cutting edges and optimized gullet areas for low-noise working with low cutting pressure even at high cutting performance. Workpiece edges free of tear-out on both sides even in critical materials due to alternating tool angle. Cutting edges with particularly precise geometry and polishing for long tool life and machining of "soft" materials. Economical due to partially exchangeable solid carbide blades with 4 cutting chamfers.

AttributeValue

Classification 

WW 430 1 05

Product type 

Cutter with bore

Cutting material 

HW

Diameter (mm)

150

Cutting width (mm)

55

Bore diameter / interface (mm)

31,75

Maximum bore diameter (mm)

40

Number of teeth 

1/1

Workpiece material 

Solid wood
Composites
Board, coated
Board, uncoated
Plastics

RPM (min-1)

5000

RPM to (min-1)

9000

Swivel range (°)

0 - 65

Stock availability 

available at short notice
Solid wood
Composites
Board, coated
Board, uncoated
Plastics
available from stock
available at short notice