back
print page
Profile cutterhead HSK 85 WS
ID: 136212
  • Measurement:

    /D90/SB170/S85x26/L228/Z2/LH

  • Application:

    For multi-purpose profiles in hard and/or materials likely to splinter.

  • Machine:

    Four-sided moulders with HSK 85 WS interface.

  • Workpiece material:

    Cutting angle 20° for softwood and hardwood in general.
    Cutting angle 12° for materials likely to splinter e.g. oak, Douglas fir, merbau and wood fibre materials, e.g. MDF.

  • Technical information:

    Profile cutterhead with back serration, 1.6 mm pitch, with integrated HSK.
    Blanks with knife thickness 8 - 10 mm and knife heights of 40 - 70 mm can be used depending on the required profile depth. Cutting materials: Marathon (MC) and HW. Steel tool body. High balance quality by assembly with parts of the same weight.

AttributeValue

Classification 

WP 510 2 02

Product type 

Cutter with bore

Diameter of tool body (mm)

90

Cutting width (mm)

170

Dimension A (mm)

26

Bore diameter / interface (mm)

HSK 85 WS

Number of teeth 

2

Cutting angle (°)

20

Workpiece material 

Plastics
Composites
Solid wood

Maximum RPM (min-1)

12000

Rotation 

LH / bottom

Stock availability 

available from stock

* = Not for PKS blank knives H = 70 mm with n = 12000 min-1
Cutterhead without knives. For blank knives in different dimensions and qualities, see section Knives and Spare Parts.

Plastics
Composites
Solid wood
available from stock
available at short notice