Minifinger joint cutter
ID: 021729
- Measurement:
HS:180x37x50,Z4,Z2/2
- Application:
For self-locking longitudinal joints. See section introduction for additional information.
- Machine:
Finger joint machines with/without cut-off saw, continuous machines.
- Workpiece material:
Softwood, across grain; limited suitability for hardwood.
- Technical information:
- Reduced risk of breakage from individually brazed finger cutting edges. Cutting material HS. Resharpening area 12 mm.
| Attribute | Value |
|---|---|
Classification | WF 620 2 |
Product type | Cutter with bore |
Cutting material | HS |
Diameter (mm) | 180 |
Cutting width (mm) | 37 |
Thickness of hub (mm) | 35 |
Bore diameter / interface (mm) | 50 |
Number of teeth | 2/2 |
Number of fingers (PCS) | 7 |
Workpiece material | Solid wood |
Maximum RPM (min-1) | 8000 |
Finger length (mm) | 20/20 |
Stock availability | available from stock |
Solid wood
available from stock
available at short notice