back
print page
Multi purpose minifinger joint cutterhead
ID: 135005
  • Measurement:

    HW,250x60x50,Z3+3

  • Application:

    For self-locking longitudinal joints for non-supporting components, e.g. panels and strips.

  • Machine:

    Finger joint machines and continuous machines with cut-off saw.

  • Workpiece material:

    Softwood and hardwood, across grain.

  • Technical information:

    Steel tool body with HW turnblade knives. Particularly suitable for hardwood, e.g. for horizontal joints with and without shoulders. Variable design for defined wood thicknesses from 15 to 60 mm. The rest of the knife seating must be filled with spacers and a safety washer (spare part no. 4). Individual cutting edges can be replaced if a cutting edge breaks. Resharpening area 2 x 6 mm.

AttributeValue

Classification 

WM 620 2 01

Product type 

Cutter with bore

Cutting material 

HW

Diameter (mm)

250

Cutting width (mm)

60

Bore diameter / interface (mm)

50

Number of teeth 

3/3

Workpiece material 

Solid wood

Maximum RPM (min-1)

5000

Profile 

1

Rotation 

LH

Wood thickness  (mm)

60

Stock availability 

available at short notice

Attention: When assembling, always finish by fitting spacers with the securing device (spare part no. 4).

Tools for profile 2 - 5 on request.

Solid wood
available from stock
available at short notice