Boring pin WB 100 0 01
Workpiece material:
Chipboard / MDF
Operation:
Horizontal edge drilling
- Measurement:
HW/D6/NL35/S10x30/GL70
- Application:
For drilling blind holes, particularly dowel holes on the side of panel furniture parts.
- Machine:
Point-to-point drilling machines, through feed drilling machines, CNC machining centres, hinge boring machines, multi spindle units.
- Workpiece material:
Softwood and hardwood, chipboard and fibre materials (MDF, HDF etc.), uncoated, plastic coated, veneered etc., laminated veneer lumber (plywood, multiplex plywood etc.).
- Technical information:
Solid tungsten carbide design for high performance time. Large resharpening area. Tool suitable for RH and LH rotation. Drill design D = 3 mm particularly suitable for pre-drilling screw holes in plastic coated and veneered furniture parts. Infeed depth in hardwood and glulam maximum 2 x D.
| Attribute | Value |
|---|---|
Classification | WB 100 0 01 |
Product type | Drill |
Cutting material | HW solid |
Diameter (mm) | 6 |
Total length (mm) | 70 |
Cutting length (mm) | 35 |
Shank dimension (mm) | 10x27 |
Shank / Interface (mm) | 10 |
Number of teeth | 1 |
Workpiece material | Board, coated Board, uncoated Composites Solid wood |
RPM (min-1) | 3000 |
RPM to (min-1) | 9000 |
Rotation | LH, RH |
Stock availability | available from stock |
RPM: n = 3000 - 9000 min-1
Note:
When using the bore pins in hardwood and glulam, the potential bore depth is restricted. Interim chip removal (return stroke) then is obligatory.
Boring pins require more power compared to dowel drills. The maximum number of boring pins, used in one drilling unit, depends on the power of the machine.