WB 110 0, shank with clamping flat and adjusting screw
Workpiece material:
Solid wood
Operation:
Drilling
Correction factor for vf:
Drilling depth > 4 x D = 0.8
- Measurement:
HW/D16/NL80/S10x25/GL110/RL
- Application:
For drilling deep holes. Suitable for depths up to 75 mm without interim clearance strokes. Particularly suitable for producing joint holes in timber frame construction.
- Machine:
Column drilling machines, drilling machines, multi spindle units, special purpose drilling machines, portable drills.
- Workpiece material:
Softwood and hardwood, laminated veneer lumber (plywood, multiplex plywood etc.), glued lumber.
- Technical information:
Tungsten carbide design, Z 1/V 1 and centre point. Very large gullets for good chip removal, particularly when drilling in end grain.
| Attribute | Value |
|---|---|
Classification | WB 110 0 |
Product type | Drill |
Cutting material | HW |
Diameter (mm) | 16 |
Total length (mm) | 110 |
Cutting length (mm) | 80 |
Shank dimension (mm) | 10x25 |
Shank / Interface (mm) | 10 |
Number of teeth | 1 |
Number of spurs | 1 |
Workpiece material | Board, coated Board, uncoated Composites Solid wood |
RPM (min-1) | 3000 |
RPM to (min-1) | 7500 |
Rotation | RH |
Stock availability | available from stock |
RPM: n = 3000 - 7500 min-1