• Application:

    For jointing and bevelling with adjustable bevel angle.

  • Machine:

    Spindle moulders, moulders, edgebanding machines, double-end tenoners and special machines.

  • Workpiece material:

    Softwood and hardwood, laminated veneer lumber, plastomers, limited suitable for MDF and chipboad (uncoated or coated).

  • Technical information:

    Knife holder swivelling adjustable from 0 - 90°. Quick and easy angle adjustment of common angles (15°, 30°, 45°, 60°) by additional locking positions in 15° steps. Free of marks cutting result due to 1-part, continuous cutting edge. Economical due to changeable tungsten carbide turnblades with two cutting edges. Optimized gullet design for improved chip removal.

D
mm
SB
mm
BO
mm
BOmax
mm
Swivel range
°
n
min-1
Z ID

150

50

30

40

0 - 90

5000

2

150

50

31,75

40

0 - 90

5000

2

150

50

40

40

0 - 90

5000

2

  • D: Diameter
  • SB: Cutting width
  • BO: Bore diameter / interface
  • BOmax: Maximum bore diameter
  • n: RPM
  • Z: Number of teeth
available from stock
available at short notice

Spare knives:

Ersatzteil Nr. BEZ ABM
mm
QAL VE
PCS
ID

1

Turnblade knife

50x12x1,5

HW-05F

10

005086
available from stock
Spare parts:
Ersatzteil Nr. BEZ ABM
mm
ID

2

Clamping wedge with pin

48x10,88x6

009766
available from stock

3

Allen screw

M6x12

006035
available from stock

Allen key

SW 3

005433
available from stock

Allen key

SW 8, L 100

005437
available from stock

Setting gauge for knives

80x12x9,5

005352
available from stock