- Application:
For tear-free and low noise jointing of workpiece edges side with and against feed (jump cutting).
- Machine:
Edgebanding machines with zero joint technology.
- Workpiece material:
Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).
- Technical information:
Increase of the processing quality through zero clearance hydro adaptor. Tool with alternate shear angle for tear-free jointing edge and straight cutting surface. Low noise design with noise reduction up to 5 dB(A) and highly efficient chip collection (>95%). Tool with knife arrangement S produces hollow cut for tightly closing edgebanding.
- Machine: Make of machine
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- nmax: Maximum RPM
- NAL: Position of hub
- Z: Number of teeth
available from stock
available at short notice
Spare parts:
BEZ |
ABM
mm
| ID |
---|---|---|
Securing part | for HF-spindle HF 30 |
066563
available from stock |
Allen key | SW 5, L 150 |
005501
available from stock |