• Application:

    For tear-free jointing with and against feed (e.g. jump cutting).

  • Machine:

    Edgebanding machines and double-end tenoners.

  • Workpiece material:

    Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).

  • Technical information:

    Tool with large, alternate shear angle for tear-free edges and straight jointed edge. 4.0 mm resharpening area.

Recommended feed rate for 6000 min-1 for veneered or coated particle and fibre materials.
Z=4 25 m min-1
Z=6 35 m min-1
Z=8 45 m min-1
Z=10 55 m min-1
Z=12 65 m min-1
Z=14 80 m min-1

  • Machine: Make of machine
  • D: Diameter
  • SB: Cutting width
  • ND: Thickness of hub
  • BO: Bore diameter / interface
  • NAL: Position of hub
  • nmax: Maximum RPM
  • Z: Number of teeth
available from stock
available at short notice