• Application:

    Grooving with feed (climb cut).

  • Machine:

    Moulders and double-end tenoners.

  • Workpiece material:

    Solid wood, uncoated, coated and veneered wood derived materials.

D
mm
SB
mm
TDI
mm
BO
mm
BOmax
mm
DKN
mm
Z QAL nmax
min-1
ID

150

1,5

0,8

30

60

18

HW

11400

150

2,0

1,2

30

60

18

HW

11400

150

2,5

1,4

30

60

18

HW

11400

150

3,0

2,0

30

60

18

HW

11400

150

4,0

2,5

30

60

18

HW

11400

150

5,0

3,5

30

60

18

HW

11400

150

6,0

4,5

30

60

18

HW

11400

150

8,0

6,0

30

60

18

HW

11400

150

8,5

6,0

30

60

18

HW

11400

150

10,0

7,0

30

60

18

HW

11400

180

2,0

1,2

30

70

18

HW

9500

180

2,5

1,4

30

70

18

HW

9500

180

3,0

2,0

30

70

18

HW

9500

180

3,5

2,2

30

70

18

HW

9500

180

4,0

2,5

30

60

18

HW

9500

180

5,0

3,5

30

60

18

HW

9500

180

6,0

4,5

30

60

18

HW

9500

180

8,0

6,0

30

60

18

HW

9500

180

8,5

6,0

30

60

18

HW

9500

180

10,0

7,0

30

60

18

HW

9500

200

2,0

1,2

35

80

10x45

18

HW

8500

200

2,5

1,4

35

80

10x45

18

HW

8500

200

3,0

2,0

35

80

10x45

18

HW

8500

200

4,0

2,5

35

80

10x45

18

HW

8500

200

5,0

3,5

35

80

10x45

18

HW

8500

200

6,0

4,5

35

80

10x45

18

HW

8500

200

8,0

6,0

35

80

10x45

18

HW

8500

200

8,5

6,0

30

80

10x45

18

HW

8500

200

10,0

7,0

35

80

10x45

18

HW

8500

  • D: Diameter
  • SB: Cutting width
  • TDI: Thickness of tool
  • BO: Bore diameter / interface
  • BOmax: Maximum bore diameter
  • DKN: Double keyway
  • Z: Number of teeth
  • QAL: Cutting material
  • nmax: Maximum RPM
available from stock
available at short notice