• Application:

    For hogging along and across grain with/without scoring sawblade.

  • Machine:

    Sizing station in production lines.

  • Workpiece material:

    Chip and fibre boards (MDF etc.) uncoated, veneered, plastic coated.

  • Technical information:

    Cut edge quality of the trim and finish cuts is defined by the sawblades. Set assembled with finish cut, trim sawblade and twelve tungsten carbide tipped segments. Staggered cut by twelve hogging segment. The hogger is mounted directly on the motor spindle without flanged sleeve.

Machine D
mm
SB
mm
BO
mm
Z/ZFSawblade QAL ID
LH
ID
RH

Siempelkamp

350

42,1

30

60 ES/FA

72 WZ

HW

  • Machine: Make of machine
  • D: Diameter
  • SB: Cutting width
  • BO: Bore diameter / interface
  • Z/ZFSawblade: Z/ZF Sawblade
  • QAL: Cutting material
available from stock
available at short notice
Spare parts:
Ersatzteil Nr. BEZ ABM
mm
BEM ID

1

Countersink screw, Torx® 20

M6x16

Torx® 20

006086
available from stock

2

Cylindrical screw with ISK

M8x35

for D = 305/350

005874
available from stock