

Serrated back blank knives with high precision serration, serration angle 60°, pitch 1.6 mm.

Attention:
For safety reasons, always mount knives and backing plates (VE) of the same weight opposite to each other.

Table to determine maximum profile depth.
The profile depth figures are to be regarded as standard values. The maximum profile depth depends on the tool diameter and cutting angle.






- Application:
Cutting of multi-purpose profiles with high feed speeds.
- Machine:
Four-sided moulders and profile machines.
- Workpiece material:
Softwood and hardwood.
- Technical information:
Profile cutterhead with 60°-serration, 1.6 mm pitch. Steel tool body with corrosion resistant surface protection. For blank knives with 8 - 10 mm knife thickness and 5 mm (see table) and 40 - 70 mm knife height, depending on the required profile depth. Integrated hydro clamping system with exchangeable clamping sleeves. Activated by a grease gun. Hydro profile cutterheads can only be used in combinaion with a clamping collar.
TD
mm
|
SB
mm
|
BO
mm
|
for knife thickness
mm
| Z |
nmax
min-1 | ID |
---|---|---|---|---|---|---|
135 | 100 | 40 | 8 - 10 | 4 | 9400 | |
135 | 150 | 40 | 8 - 10 | 4 | 9400 | |
145 | 60 | 50 | 8 - 10 | 6 | 9100 | |
145 | 100 | 50 | 8 - 10 | 6 | 9100 | |
150 | 60 | 50 | 8 - 10 | 4 | 8800 |
137039
available from stock |
150 | 100 | 50 | 8 - 10 | 4 | 8800 |
137040
available from stock |
150 | 150 | 50 | 8 - 10 | 4 | 8800 |
137041
available from stock |
150 | 230 | 50 | 8 - 10 | 4 | 8800 |
137042
available from stock |
150 | 60 | 50 | 8 - 10 | 6 | 8800 |
137043
available from stock |
150 | 100 | 50 | 8 - 10 | 6 | 8800 |
137044
available from stock |
150 | 150 | 50 | 8 - 10 | 6 | 8800 |
137045
available from stock |
150 | 230 | 50 | 8 - 10 | 6 | 8800 | |
165 | 60 | 50 | 8 - 10 | 8 | 8200 | |
165 | 100 | 50 | 8 - 10 | 8 | 8200 | |
170 | 60 | 50 | 8 - 10 | 8 | 8100 |
137049
available from stock |
170 | 100 | 50 | 8 - 10 | 8 | 8100 | |
170 | 150 | 50 | 8 - 10 | 8 | 8100 |
137051
available from stock |
190 | 60 | 50 | 5 | 12 | 7400 | |
190 | 60 | 50 | 5 | 14 | 7400 |
Cutterhead without knives. Blanks in various dimensions and qualities see section Knives and Spare Parts.
- TD: Diameter of tool body
- SB: Cutting width
- BO: Bore diameter / interface
- Z: Number of teeth
- nmax: Maximum RPM
Ersatzteil Nr. | BEZ |
ABM
mm
|
for SB
mm
| ID |
---|---|---|---|---|
2 | Clamping wedge | 38x25,3x10,8 | 40 |
620700
available from stock |
2 | Clamping wedge | 58x25,3x10,8 | 60 |
620701
available from stock |
2 | Clamping wedge | 78x25,3x10,8 | 80 |
620702
available from stock |
2 | Clamping wedge | 98x25,3x10,8 | 100 |
620703
available from stock |
2 | Clamping wedge | 128x25,3x10,8 | 130 |
620705
available from stock |
2 | Clamping wedge | 148x25,3x10,8 | 150 |
620706
available from stock |
2 | Clamping wedge | 168x25,3x10,8 | 170 |
620707
available at short notice |
2 | Clamping wedge | 178x25,3x10,8 | 180 |
620708
available at short notice |
2 | Clamping wedge | 228x25,43x11 | 230 |
620709
available at short notice |
2 | Clamping wedge | 238x25,3x10,8 | 240 |
620710
available at short notice |
3 | Allen screw | M10x1x20 |
007396
available from stock | |
Filler piece | 40x30x8 | 40 |
005305
available from stock | |
Filler piece | 60x30x8 | 60 |
005306
available from stock | |
Filler piece | 80x30x8 | 80 |
005307
available from stock | |
Filler piece | 100x30x8 | 100 |
005308
available from stock | |
Filler piece | 130x30x8 | 130 |
005310
available from stock | |
Filler piece | 150x30x8 | 150 |
005311
available from stock | |
Filler piece | 170x30x8 | 170 |
620770
available from stock | |
Filler piece | 180x30x8 | 180 |
005312
available from stock | |
Filler piece | 230x30x8 | 230 |
005313
available from stock | |
Filler piece | 240x30x8 | 240 |
620771
available from stock | |
Allen key | SW 5 |
117509
available from stock |