- Application:
For self-locking longitudinal joints. See section introduction for additional information.
- Machine:
Finger joint machines with and without cut-off saw, continuous machines.
- Workpiece material:
Softwood and hardwood.
- Technical information:
Steel tool body with block knives. Individually replaceable knives if damaged. Always resharpen sets of tools to the same diameter. Marathon coating allows up to 4 times longer tool life compared to HS version. Resharpening area 10 mm for MC or 6 mm for HW.
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- ND: Thickness of hub
- Z: Number of teeth
- TG: Pitch
- ZA: Number of fingers
- nmax: Maximum RPM
available from stock
available at short notice
Spare knives:
| Cut-off saws | Tip gap | Profile knife |
ZL
mm
|
TG
mm
|
ZA
PCS
|
ID
2
|
ID
3
|
|---|---|---|---|---|---|---|---|
without | standard | right | 10/10 | 3,8 | 4 |
611452
available at short notice |
611552
available at short notice |
without | standard | left | 10/10 | 3,8 | 4 |
611453
available at short notice |
611553
available at short notice |
with | standard | right | 10/11 | 3,8 | 4 |
611450
available at short notice |
611550
available at short notice |
with | standard | left | 10/11 | 3,8 | 4 |
611458
available at short notice |
611558
available at short notice |
without | large | right | 10/10 | 3,8 | 4 |
611474
available at short notice |
611574
available at short notice |
without | large | left | 10/10 | 3,8 | 4 |
611475
available at short notice |
611575
available at short notice |