Cutting material:
HW-30F / HW-10F

Attention:
Maximum knife protrusion above the backing plate 4.5 mm. For safety reasons, only mount knives and backing plates of same weight in opposite seatings.

SB
mm
H
mm
DIK
mm
PTmax
mm
SET
PCS
QAL ID
Blank knife set
ID
Blank knife set with backing plate

40

50

10

15

2

HW-30F

60

50

10

15

2

HW-30F

80

50

10

15

2

HW-30F

100

50

10

15

2

HW-30F

130

50

10

15

2

HW-30F

150

50

10

15

2

HW-30F

170

50

10

15

2

HW-30F

180

50

10

15

2

HW-30F

190

50

10

15

2

HW-30F

210

50

10

15

2

HW-30F

230

50

10

15

2

HW-30F

240

50

10

15

2

HW-30F

270

50

10

15

2

HW-30F

310

50

10

15

2

HW-30F

40

50

10

15

2

HW-10F

60

50

10

15

2

HW-10F

80

50

10

15

2

HW-10F

100

50

10

15

2

HW-10F

130

50

10

15

2

HW-10F

150

50

10

15

2

HW-10F

170

50

10

15

2

HW-10F

180

50

10

15

2

HW-10F

190

50

10

15

2

HW-10F

210

50

10

15

2

HW-10F

230

50

10

15

2

HW-10F

240

50

10

15

2

HW-10F

270

50

10

15

2

HW-10F

310

50

10

15

2

HW-10F

The indicated profile depth values should be regarded as standard values for information. The maximum profile depth depends on the tool diameter and cutting angle.

Set of the same weight.

  • Blank knives with polished cutting face for high cutting edge quality.
  • Solid tungsten carbide - profile knives, adjustable (1.80 mm steps).
  • Knives supported by profiled backing plates.
  • Resharpening area 10.8 mm at maximum profile depth.
  • SB: Cutting width
  • H: Height
  • DIK: Thickness
  • PTmax: Maximum profile depth
  • SET: Set
  • QAL: Cutting material
available from stock
available at short notice