Cutting material:
HW-30F / HW-10F

Attention:
Maximum knife protrusion above the backing plate 4.5 mm. For safety reasons, only mount knives and backing plates of same weight in opposite seatings.

SB
mm
H
mm
DIK
mm
PTmax
mm
SET
PCS
QAL ID
Blank knife set
ID
Blank knife set with backing plate

40

60

10

20

2

HW-30F

60

60

10

20

2

HW-30F

80

60

10

20

2

HW-30F

100

60

10

20

2

HW-30F

130

60

10

20

2

HW-30F

150

60

10

20

2

HW-30F

170

60

10

20

2

HW-30F

180

60

10

20

2

HW-30F

190

60

10

20

2

HW-30F

210

60

10

20

2

HW-30F

230

60

10

20

2

HW-30F

240

60

10

20

2

HW-30F

40

60

10

20

2

HW-10F

60

60

10

20

2

HW-10F

80

60

10

20

2

HW-10F

100

60

10

20

2

HW-10F

130

60

10

20

2

HW-10F

150

60

10

20

2

HW-10F

170

60

10

20

2

HW-10F

180

60

10

20

2

HW-10F

190

60

10

20

2

HW-10F

210

60

10

20

2

HW-10F

230

60

10

20

2

HW-10F

240

60

10

20

2

HW-10F

The indicated profile depth values should be regarded as standard values for information. The maximum profile depth depends on the tool diameter and cutting angle.

Set of the same weight.

  • Blank knives with polished cutting face for high cutting edge quality.
  • Solid tungsten carbide - profile knives, adjustable (1.80 mm steps).
  • Knives supported by profiled backing plates.
  • Resharpening area 10.8 mm at maximum profile depth.
  • SB: Cutting width
  • H: Height
  • DIK: Thickness
  • PTmax: Maximum profile depth
  • SET: Set
  • QAL: Cutting material
available from stock
available at short notice