- Application:
Reducing sleeve with/without flange for cutting tools and tool sets for use on spindles of various diameters.
- Machine:
Spindle moulders, plug cutters etc.
- Technical information:
The length of the reducing sleeve should be approximately 2 mm shorter than the width of the hub or the total height of the tool/tool set.
For safety reasons, the use of reducing sleeves should be avoided if possible.
|
d
mm
|
BO
mm
|
NL
mm
| ID |
|---|---|---|---|
35 | 30 | 10 |
028290
available from stock |
35 | 30 | 40 |
028293
available from stock |
35 | 30 | 60 |
028294
available from stock |
35 | 30 | 96 |
028295
available from stock |
40 | 30 | 20 |
028296
available from stock |
40 | 30 | 40 |
028298
available from stock |
40 | 30 | 53 |
028300
available from stock |
40 | 30 | 60 |
028301
available from stock |
40 | 30 | 96 |
028302
available from stock |
40 | 35 | 30 |
028304
available from stock |
40 | 35 | 40 |
028305
available from stock |
40 | 35 | 60 |
028306
available from stock |
40 | 35 | 96 |
028307
available from stock |
50 | 40 | 96 |
028310
available from stock |
- d: Clamping diameter
- BO: Bore diameter / interface
- NL: Cutting length
available from stock
available at short notice