• Application:

    For cutting of thin slats on horizontal spindles.

  • Machine:

    Edging, single blade, multi blade saws as well as saws or moulders with one or two spindles.

  • Workpiece material:

    Softwood and hardwood, dry up to 10% wood moisture content.

  • Technical information:

    With internal raker blades for better dimensional stability. Efficient energy and wood utilisation due to reduced cutting widths. Special limitor shape (up to D 250 mm) to protect the teeth when used in wood with loose knots and cracked wood. From D 300 mm large gullet areas for better chip ejection. Higher cutting performance and less resinification due to special coating of the tool body.

D
mm
SB
mm
TDI
mm
BO
mm
BOmax
mm
DKN
mm
Z ZF SW
°
WSS ID

200

2,4

1,6

30

24

FZ

25

Solid wood

200

2,4

1,6

40

60

24

FZ

20

Solid wood

220

2,4

1,6

30

24

FZ

25

Solid wood

220

2,4

1,6

40

80

24

FZ

20

Solid wood

250

2,4

1,6

30

24

FZ

20

Solid wood

250

2,4

1,6

40

90

24

FZ

20

Solid wood

250

2,4

1,6

70

21/83

24

FZ

20

Solid wood

250

2,4

1,6

80

19x89

13x89

24

FZ

20

Solid wood

300

2,8

1,8

30

100

30

FZ

25

Solid wood

300

2,8

1,8

80

19x89

13x89

30

FZ

25

Solid wood

350

2,8

1,8

30

110

30

FZ

25

Solid wood
  • D: Diameter
  • SB: Cutting width
  • TDI: Thickness of tool
  • BO: Bore diameter / interface
  • BOmax: Maximum bore diameter
  • DKN: Double keyway
  • Z: Number of teeth
  • ZF: Tooth shape
  • SW: Cutting angle
  • WSS: Workpiece material
Solid wood
available from stock
available at short notice