- Application:
Reducing sleeve with/without flange for cutting tools and tool sets for use on spindles of various diameters.
- Machine:
Spindle moulders, plug cutters etc.
- Technical information:
The length of the reducing sleeve should be approximately 2 mm shorter than the width of the hub or the total height of the tool/tool set.
For safety reasons, the use of reducing sleeves should be avoided if possible.
d
mm
|
BO
mm
|
BO
in
|
NL
mm
|
GL
mm
|
DB
mm
|
BDD
mm
| ID |
---|---|---|---|---|---|---|---|
30 | 25 | 18 | 22 | 50 | 4 |
028201
available from stock | |
35 | 30 | 18 | 23 | 55 | 5 |
028204
available from stock | |
40 | 30 | 18 | 24 | 60 | 6 |
028206
available from stock | |
40 | 35 | 18 | 24 | 60 | 6 |
028207
available from stock | |
40 | 31,75 | 1 1/4″ | 18 | 24 | 60 | 6 |
028220
available from stock |
50 | 30 | 18 | 24 | 70 | 6 |
028208
available from stock | |
50 | 35 | 18 | 24 | 70 | 6 |
028210
available from stock | |
50 | 40 | 18 | 24 | 70 | 6 |
028211
available from stock | |
50 | 45 | 18 | 24 | 70 | 6 |
028209
available from stock | |
60 | 30 | 18 | 24 | 80 | 6 |
028212
available from stock | |
60 | 40 | 18 | 24 | 80 | 6 |
028214
available from stock | |
60 | 50 | 18 | 24 | 80 | 6 |
028216
available from stock |
- d: Clamping diameter
- BO: Bore diameter / interface
- BO: Bore diameter
- NL: Cutting length
- GL: Total length
- DB: Diameter of shoulder
- BDD: Thickness of shoulder
available from stock
available at short notice