- Application:
Clamping chuck for drill bits with 10 mm shank diameter and driving flat for drilling spindles with threaded adaptor.
- Technical information:
Stable and secure clamping of drills by 2 clamping screws. Smallest spindle pitch in the drilling unit: 21 mm. For narrower pitches, 8 mm shank chucks and drills must be used.
| Machine |
GL
mm
| Pic. |
ID
LH
|
ID
RH
|
|---|---|---|---|---|
Nottmeyer (old machine type) | 40 | A |
033088
available from stock |
033089
available from stock |
Ayen, Brandt, Holzma, Homag, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola | 40 | B |
033092
available from stock |
033093
available from stock |
Lehbrink, Nottmeyer (new machine type) | 40 | C |
033080
available from stock |
033081
available from stock |
Lehbrink, Nottmeyer (new machine type) | 52 | C |
033082
available from stock |
033083
available from stock |
Alberti, Balestrini, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Holz-Her, Homag, Hüllhorst, Koch, Morbidelli, Reimall, Torwegge, Vitap (from YOM 4/91 on), Weeke | 43 | D |
033086
available from stock |
033087
available from stock |
Bilek, Knoevenagel | 55 | E |
033084
available from stock |
033085
available from stock |
Alberti, Balestrini, Bilek, Busellato, Dubus, Goma, Grotefeld, Ompec, Reimall, Schleicher, SCM, Tanzani, Viciani, Vitap (up to YOM 4/91), Weingärtner | 45,5 | F |
033090
available from stock |
033091
available from stock |
Morbidelli | 51 | G |
033094
available from stock |
033095
available from stock |
Scheer | 45 | H |
033096
available from stock |
033097
available from stock |
- Machine: Make of machine
- GL: Total length
- Pic.: Picture
| BEZ |
ABM
mm
| ID |
|---|---|---|
Allen key | SW 3 |
005433
available from stock |
Allen screw | M6x5 |
005836
available from stock |