- Application:
Quick clamping chuck for drills with 10 mm shank and driving flat for drilling spindles with threaded adaptor.
- Technical information:
The drill is held in the chuck by the length adjusting screw (ID 009157). Ideal if the hole diameter must be changed quickly. Quick clamping chucks not in use should be covered using the optional dust cover.
Note: The drill shanks require an appropriate shank and driving flat dimensional tolerance to ensure trouble free operation. Drills from the Leitz range guarantees functional reliability. Speed up to 12000 min-1 (quick change drill adaptor without drill must be covered with the dust cover ID 115521 for speeds exceeding 9000 min-1 to prevent unbalance).
| Machine | BEM |
GL
mm
| Pic. |
ID
LH
|
ID
RH
|
|---|---|---|---|---|---|
Lehbrink, Nottmeyer (new machine type) | 45 | A |
033102
available from stock |
033103
available from stock | |
Ayen, Brandt, Holzma, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola | 45 | B |
033104
available from stock |
033105
available from stock | |
Nottmeyer (old machine type) | 45 | C |
033098
available from stock |
033099
available from stock | |
Alberti, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Holz-Her, Hüllhorst, Koch, Morbidelli, Reimall, Torwegge, Vitap (from YOM 4/91 on), Weeke | 46 | D |
033100
available from stock |
033101
available from stock | |
Weeke | from year of construction 2/04 on | 40,25 | E |
033109
available from stock |
033110
available from stock |
Universal | Shank D-10 mm | 50 | F |
033106
available from stock |
033106
available from stock |
- Machine: Make of machine
- BEM: Note
- GL: Total length
- Pic.: Picture
| BEZ |
ABM
mm
| ID |
|---|---|---|
Dust cover | d8/10/D18/L31.2 |
115521
available from stock |
Mounting device | d8/10/D20/L43.2/SW17 |
115522
available from stock |
Length adjustment screw Torx® 20 | M5x17 |
009157
available from stock |