- Application:
Arbor for single tools with bore or tool sets with bore.
- Technical information:
Steep taper design as per DIN ISO 7388, without grooves and notches. Short design, suitable for low vibration cutting. Safety device against tool twisting by screw or pin. Arbors are fine balanced. If conical spring washers with safety device against twisting are used, slots are required in the arbor. For suitable mounting device VN 799 0, see section Knives and Spare Parts.
Note: Please comply with the specifications regarding the maximum admissible weight and diameters detailed by the machine manufacturer!
| Type |
d
mm
|
l
mm
|
NL
mm
|
GL
mm
|
DB
mm
|
TK
mm
|
Weight
kg
| ID |
|---|---|---|---|---|---|---|---|---|
E | 30 | 80 | 85 | 228,5 | 63,55 | 48 | 1,8 |
042815
available at short notice |
Sales unit consists of arbor with pull stud, clamping screw and conical spring washer (flat design), without spacers.
- d: Clamping diameter
- l: Clamping length
- NL: Cutting length
- GL: Total length
- DB: Diameter of shoulder
- TK: Reference diameter
| BEZ |
ABM
mm
| ID |
|---|---|---|
Washer with safety device against twisting, M10 | 20/35x13x10,5 |
006768
available from stock |
Washer with safety device against twisting, M16 | 30/45x15x16,5 |
006769
available from stock |
Suitable spacers, see section Knives and Spare Parts.