- Application:
For cutting strips and slats along grain on horizontal and vertical spindles.
- Machine:
Moulders with/without forced guidance of workpieces. Application on single, double, horizontal or vertical spindles.
- Workpiece material:
Softwood and hardwood, dry up to 10 % wood moisture content, quality category 0 to 1.
- Technical information:
Noise-reduced and low vibration design due to irregular tooth pitch or odd number of teeth. Cutting width reduction for high wood savings and efficient energy utilisation. Continuous tool body without recess for max. cutting height. Different number of teeth for optimal tooth feeds with different feed speed. Higher cutting performance and less resinification due to special coating of the tool body. Use on hydro sleeves or clamping arbors is recommended, as is the use of high precision spacers to increase the performance of the saws. It is essential to pay attention to the setting of machines with riving knives.
D
mm
|
SB
mm
|
TDI
mm
|
BO
mm
|
BOmax
mm
|
NLA
mm
|
FLD
mm
| Z | ZF |
SW
°
| WSS | ID |
---|---|---|---|---|---|---|---|---|---|---|---|
180 | 1,3 | 0,8 | 60 | 70 | 3/10/75 | 100 | 32 | FZ | 20 | Solid wood |
057418
available from stock |
180 | 1,5 | 1,0 | 60 | 70 | 3/10/75 | 100 | 21 | FZ | 20 | Solid wood |
057443
available from stock |
180 | 1,8 | 1,2 | 60 | 70 | 3/10/75 | 100 | 21 | FZ | 20 | Solid wood |
057444
available from stock |
180 | 1,8 | 1,3 | 60 | 70 | 3/10/75 | 100 | 32 | FZ | 20 | Solid wood |
057412
available from stock |
200 | 1,5 | 1,0 | 60 | 80 | 3/10/75 | 120 | 21 | FZ | 20 | Solid wood |
057445
available from stock |
200 | 1,5 | 1,0 | 60 | 80 | 3/10/75 | 120 | 36 | FZ | 20 | Solid wood |
057421
available from stock |
200 | 1,8 | 1,2 | 60 | 80 | 3/10/75 | 120 | 21 | FZ | 20 | Solid wood |
057446
available from stock |
220 | 1,2 | 0,9 | 60 | 80 | 3/10/75 | 120 | 27 | FZ | 20 | Solid wood |
057475
available from stock |
220 | 1,2 | 0,9 | 65 | 80 | 3/11/80 | 120 | 24 | FZ | 20 | Solid wood |
057474
available from stock |
220 | 1,3 | 0,9 | 60 | 80 | 3/10/75 | 120 | 24 | FZ | 25 | Solid wood |
057476
available from stock |
220 | 1,3 | 0,9 | 60 | 80 | 3/10/75 | 120 | 32 | FZ | 25 | Solid wood |
057478
available from stock |
220 | 1,3 | 0,9 | 65 | 80 | 3/11/80 | 120 | 24 | FZ | 25 | Solid wood |
057477
available from stock |
220 | 1,3 | 0,9 | 65 | 80 | 3/11/80 | 120 | 32 | FZ | 25 | Solid wood |
057479
available from stock |
220 | 1,4 | 1,0 | 60 | 80 | 3/10/75 | 120 | 24 | FZ | 25 | Solid wood |
057480
available from stock |
220 | 1,4 | 1,0 | 60 | 80 | 3/10/75 | 120 | 32 | FZ | 20 | Solid wood |
057464
available from stock |
220 | 1,4 | 1,0 | 65 | 80 | 3/11/80 | 120 | 24 | FZ | 25 | Solid wood |
057481
available from stock |
220 | 1,4 | 1,0 | 65 | 80 | 3/11/80 | 120 | 32 | FZ | 20 | Solid wood |
057465
available from stock |
225 | 1,5 | 1,0 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 20 | Solid wood |
057447
available from stock |
225 | 1,6 | 1,2 | 60 | 110 | 3/10/75 | 130 | 32 | FZ | 25 | Solid wood |
057482
available from stock |
225 | 1,8 | 1,2 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 20 | Solid wood |
057448
available from stock |
225 | 2,0 | 1,4 | 40 | 110 | 3/10/75 | 120 | 40 | FZ | 20 | Solid wood |
163600
available from stock |
225 | 2,0 | 1,4 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 20 | Solid wood |
057449
available from stock |
250 | 1,7 | 1,2 | 60 | 120 | 3/10/75 | 140 | 25 | FZ | 20 | Solid wood |
057450
available from stock |
250 | 1,7 | 1,2 | 60 | 120 | 3/10/75 | 140 | 36 | FZ | 20 | Solid wood |
057433
available from stock |
250 | 2,0 | 1,4 | 60 | 120 | 3/10/75 | 140 | 25 | FZ | 20 | Solid wood |
057451
available from stock |
250 | 2,0 | 1,4 | 60 | 120 | 3/10/75 | 140 | 36 | FZ | 20 | Solid wood |
057434
available from stock |
- D: Diameter
- SB: Cutting width
- TDI: Thickness of tool
- BO: Bore diameter / interface
- BOmax: Maximum bore diameter
- NLA: Pinhole dimensions
- FLD: Flange diameter
- Z: Number of teeth
- ZF: Tooth shape
- SW: Cutting angle
- WSS: Workpiece material