• Application:

    For cutting along grain - shoulder cuts in combination with middle cut sawblades.

  • Machine:

    Moulders with/without forced guidance of workpieces. Application on single, double, horizontal or vertical spindles.

  • Workpiece material:

    Softwood and hardwood, dry up to 10 % wood moisture content, quality category 0 to 1.

  • Technical information:

    Suitable for utilisation as a set in combination with thin kerf sawblades for middle cuts. Solid design to increase the rigidity of the set. Higher cutting performance and less resin formation by special coated toolbody.

D
mm
SB
mm
TDI
mm
BO
mm
NLA
mm
DKN
mm
FLD
mm
Z ZF SW
°
WSS ID

200

5,0

4,0

30

3/10/75

120

24

FZ

20

Solid wood

220

5,0

4,0

30

3/10/75

120

24

FZ

20

Solid wood

225

5,0

4,0

30

3/10/75

120

24

FZ

20

Solid wood

225

5,0

4,0

60

3/10/75

120

40

FZ

20

Solid wood

250

5,0

4,0

30

3/10/75

140

24

FZ

20

Solid wood

250

5,0

4,0

30

3/10/75

140

36

FZ

20

Solid wood

250

8,0

6,0

80

4/7/95

2/13/100

13/89

100

24

FZ

15

Solid wood

300

8,0

6,0

80

4/7/95

2/13/100

13/89

100

24

FZ

15

Solid wood
  • D: Diameter
  • SB: Cutting width
  • TDI: Thickness of tool
  • BO: Bore diameter / interface
  • NLA: Pinhole dimensions
  • DKN: Double keyway
  • FLD: Flange diameter
  • Z: Number of teeth
  • ZF: Tooth shape
  • SW: Cutting angle
  • WSS: Workpiece material
Solid wood
available from stock
available at short notice