- Application:
For cutting along grain - shoulder cuts in combination with middle cut sawblades.
- Machine:
Moulders with/without forced guidance of workpieces. Application on single, double, horizontal or vertical spindles.
- Workpiece material:
Softwood and hardwood, dry up to 10 % wood moisture content, quality category 0 to 1.
- Technical information:
Suitable for utilisation as a set in combination with thin kerf sawblades for middle cuts. Special cutting edge geometry for cut pitch and lower cutting forces. For cutting pressure reduction and reduction of burn marks even at lower feed rates. Higher cutting performance and less resin formation by special coated toolbody.
D
mm
|
SB
mm
|
TDI
mm
|
BO
mm
|
NLA
mm
|
FLD
mm
| Z | ZF |
SW
°
| WSS | ID |
---|---|---|---|---|---|---|---|---|---|---|
180 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 100 | 24 | WZ | 20 | Solid wood |
165255
available from stock |
200 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 100 | 24 | WZ | 20 | Solid wood |
165259
available from stock |
220 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 120 | 24 | WZ | 20 | Solid wood |
165260
available from stock |
220 | 3,8 | 3,0 | 65 | 3/10/75 3/11/80 | 120 | 24 | WZ | 20 | Solid wood |
165261
available from stock |
220 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 120 | 24 | WZ | 20 | Solid wood |
165262
available from stock |
225 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 120 | 24 | WZ | 20 | Solid wood |
165263
available from stock |
250 | 3,8 | 3,0 | 60 | 3/10/75 3/11/80 | 120 | 24 | WZ | 20 | Solid wood |
165264
available from stock |
- D: Diameter
- SB: Cutting width
- TDI: Thickness of tool
- BO: Bore diameter / interface
- NLA: Pinhole dimensions
- FLD: Flange diameter
- Z: Number of teeth
- ZF: Tooth shape
- SW: Cutting angle
- WSS: Workpiece material