• Application:

    For trimming and cross cutting - positioning of workpiece under the sawblade.

  • Machine:

    Cross, trimming, mitre and radial saws as well as double mitre cutting saws.

  • Workpiece material:

    Softwood and hardwood wet and dry, laminated veneer lumber (e.g. plywood, multiplex plywood).

  • Technical information:

    Especially for machines with positioning of the saw shaft above the workpiece. Negative cutting angle for improved workpiece clamping.

D
mm
SB
mm
TDI
mm
BO
mm
NLA
mm
Z ZF SW
°
WSS ID

300

3,2

2,4

30

KNL

36

WZ

-5

Solid wood

300

3,2

2,4

30

KNL

60

WZ

-5

Solid wood

300

3,2

2,4

30

KNL

96

WZ

-5

Solid wood

305

3,2

2,4

30

KNL

60

WZ

-5

Solid wood

350

3,2

2,4

30

KNL

36

WZ

-5

Solid wood

350

3,2

2,4

30

KNL

60

WZ

-5

Solid wood

350

3,5

2,8

30

KNL

108

WZ

-5

Solid wood

355

3,2

2,4

30

KNL

72

WZ

-5

Solid wood

400

3,8

2,8

30

KNL

42

WZ

-5

Solid wood

400

3,8

2,8

30

KNL

60

WZ

-5

Solid wood

400

3,8

2,8

30

KNL

120

WZ

-5

Solid wood

420

3,5

2,8

40

48

WZ

-5

Solid wood

450

3,8

2,8

30

KNL

48

WZ

-5

Solid wood

500

4,4

3,2

30

KNL

54

WZ

-5

Solid wood
  • D: Diameter
  • SB: Cutting width
  • TDI: Thickness of tool
  • BO: Bore diameter / interface
  • NLA: Pinhole dimensions
  • Z: Number of teeth
  • ZF: Tooth shape
  • SW: Cutting angle
  • WSS: Workpiece material
Solid wood
available from stock
available at short notice