• Application:

    For scoring with feed.

  • Machine:

    Panel sizing saws with scoring unit and pressure beam.

  • Workpiece material:

    Chipboard and fibre materials paper and plastic coated, veneered, laminated veneer lumber (e.g. plywood, multiplex plywood).

  • Technical information:

    Scoring depth 1.50 - 2.00 mm. Recommended especially for use in plastic and HPL-coated panels. The suitable circular scoring sawblade must be selected depending on the cutting width of the main saw.

Machine D
mm
SB
mm
TDI
mm
BO
mm
NLA
mm
Z ZF SW
°
WSS ID

SCM

100

3,2

2,5

20

20

KON/FZ

5

Board, coated

100

3,2

2,5

22

20

KON/FZ

5

Board, coated

120

3,2

2,5

20

24

KON/FZ

5

Board, coated

125

4,4

3,5

20

24

KON/FZ

5

Board, coated

Holz-Her

125

4,4

3,5

45

24

KON/FZ

5

Board, coated

Anthon

180

4,4

3,5

20

28

KON/FZ

5

Board, coated

Anthon

180

5,8

4,0

20

36

KON/FZ

5

Board, coated

Holz-Her

180

4,4

3,5

30

2/10/60

30

KON/FZ

5

Board, coated

Homag

180

4,4

3,5

45

36

KON/FZ

5

Board, coated

Homag

180

4,8

3,5

45

36

KON/FZ

5

Board, coated

Anthon

200

6,8

4,2

20

36

KON/FZ

5

Board, coated

Homag

200

4,8

3,5

45

36

KON/FZ

5

Board, coated

SCM

200

4,4

3,5

80

2/14/110

36

KON/FZ

5

Board, coated

Homag

220

3,2

2,4

45

60

KON/FZ

5

Board, coated

250

4,4

3,5

30

2/10/60

42

KON/FZ

5

Board, coated

Holz-Her

280

4,4

3,5

30

2/10/60

48

KON/FZ

5

Board, coated

Schelling

300

3,2

2,8

30

2/13/94

72

KON/FZ

5

Board, coated
  • Machine: Make of machine
  • D: Diameter
  • SB: Cutting width
  • TDI: Thickness of tool
  • BO: Bore diameter / interface
  • NLA: Pinhole dimensions
  • Z: Number of teeth
  • ZF: Tooth shape
  • SW: Cutting angle
  • WSS: Workpiece material
Board, coated
available from stock
available at short notice