- Application:
For trimming and mitre cuts - positioning of workpiece under the sawblade.
- Machine:
Cross, trimming, mitre and radial saws as well as double mitre cutting saws and CNC machining centres.
- Workpiece material:
Non-ferrous metal or plastic profiles.
- Technical information:
Spray lubrication is recommended when machining profiles made of non-ferrous metal. Negative cutting angle makes it particularly suitable for profiles where hooking and deformation of the profiles are to be avoided. Particularly suitable for cutting from above. Negative rake angle for improved workpiece clamping. Excellent version. Vibration damping composite construction of the support body by steel foil. Extreme noise reduction even with increasing dulling of the tool.
D
mm
|
SB
mm
|
TDI
mm
|
BO
mm
|
NLA
mm
| Z | ZF |
SW
°
| Foil | WSS | ID |
---|---|---|---|---|---|---|---|---|---|---|
300 | 3,2 | 2,6 | 30 | KNL | 96 | FZ/TR | -5 | left | Non-ferrous metals Plastics |
161380
available from stock |
300 | 3,2 | 2,6 | 30 | KNL | 96 | FZ/TR | -5 | right | Non-ferrous metals Plastics |
161381
available from stock |
350 | 3,2 | 2,6 | 30 | KNL | 108 | FZ/TR | -5 | left | Non-ferrous metals Plastics |
161382
available from stock |
350 | 3,2 | 2,6 | 30 | KNL | 108 | FZ/TR | -5 | right | Non-ferrous metals Plastics |
161383
available from stock |
- D: Diameter
- SB: Cutting width
- TDI: Thickness of tool
- BO: Bore diameter / interface
- NLA: Pinhole dimensions
- Z: Number of teeth
- ZF: Tooth shape
- SW: Cutting angle
- Foil: Dampfoil
- WSS: Workpiece material