- Application:
For sizing and cross cutting without scoring.
- Machine:
Table and sizing saws, vertical panel sizing saws, panel sizing saws with pressure beam.
- Workpiece material:
Easy melting plastics (e.g. PP, PA).
- Technical information:
Reduced number of teeth for lower heat generation as well as lower feed forces and lower power consumption even at large cutting depths. Tooth shape for cutting pitch and reduction of heat generation. Large chip spaces for optimum chip transport. Circular saw blade with suitable number of teeth must be selected depending on the material thickness. Low number of teeth for large workpiece thicknesses.
D
mm
|
SB
mm
|
TDI
mm
|
BO
mm
|
NLA
mm
| Z | ZF |
SW
°
| WSS | ID |
---|---|---|---|---|---|---|---|---|---|
300 | 3,6 | 2,2 | 30 | KNL | 20 | FZ/TR | 10 | Plastics |
163500
available from stock |
300 | 3,6 | 2,2 | 30 | KNL | 42 | FZ/TR | 10 | Plastics |
163501
available from stock |
350 | 3,8 | 2,5 | 30 | KNL | 24 | FZ/TR | 10 | Plastics |
163502
available from stock |
350 | 3,8 | 2,5 | 30 | KNL | 48 | FZ/TR | 10 | Plastics |
163503
available from stock |
400 | 3,8 | 2,5 | 30 | KNL | 28 | FZ/TR | 10 | Plastics |
163504
available from stock |
400 | 3,8 | 2,5 | 30 | KNL | 54 | FZ/TR | 10 | Plastics |
163505
available from stock |
450 | 4,0 | 2,8 | 30 | KNL | 34 | FZ/TR | 10 | Plastics |
163506
available from stock |
500 | 4,4 | 3,0 | 30 | KNL | 36 | FZ/TR | 10 | Plastics |
163507
available from stock |
- D: Diameter
- SB: Cutting width
- TDI: Thickness of tool
- BO: Bore diameter / interface
- NLA: Pinhole dimensions
- Z: Number of teeth
- ZF: Tooth shape
- SW: Cutting angle
- WSS: Workpiece material