- Application:
For tear-free jointing with and against feed (e.g. jump cutting).
- Machine:
Edgebanding machines and double-end tenoners.
- Workpiece material:
Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).
- Technical information:
Tool with large, alternate shear angle for tear-free edges and straight jointed edge. 4.0 mm resharpening area.
Machine |
D
mm
|
SB
mm
|
ND
mm
|
BO
mm
| NAL |
nmax
min-1 | Z | Type |
ID
LH
|
ID
RH
|
---|---|---|---|---|---|---|---|---|---|---|
Homag, IMA | 180 | 34 | 34 | 35 DKN | 2 | 9500 | 6x3 | AS | ||
Homag, IMA | 180 | 43 | 46 | 35 DKN | 1 | 9500 | 6x5 | AS | ||
Homag, IMA | 180 | 63 | 46 | 35 DKN | 3 | 9500 | 6x7 | AS | ||
Homag, IMA | 180 | 34 | 34 | 35 DKN | 2 | 9500 | 8x4 | AS | ||
Homag, IMA | 180 | 43 | 46 | 35 DKN | 1 | 9500 | 8x5 | AS | ||
Homag, IMA | 180 | 63 | 46 | 35 DKN | 3 | 9500 | 8x7 | AS |
Recommended feed rate for 6000 min-1 for veneered or coated particle and fibre materials.
Z=4 25 m min-1
Z=6 35 m min-1
Z=8 45 m min-1
Z=10 55 m min-1
Z=12 65 m min-1
Z=14 80 m min-1
- Machine: Make of machine
- D: Diameter
- SB: Cutting width
- ND: Thickness of hub
- BO: Bore diameter / interface
- NAL: Position of hub
- nmax: Maximum RPM
- Z: Number of teeth
available from stock
available at short notice