- Application:
Multi-purpose planing tool:
For pre-planing with RipTec turnblades.
For finish planing with microfinish turnblades. - Machine:
Four-sided moulders and multi spindle moulders with HSK 85 WS interfaces.
- Workpiece material:
Softwood and hardwood, thermoplastics (partly suitable).
- Technical information:
Resharpenable and constant diameter planerhead system. Self-positioning and centrifugal force supported knife clamping. Lightweight aluminium tool body. Resharpening the knives on the cutting face means one sharpening operation gives two additional lives. Tool body and HSK arbor are shrunk fit together.
|
D
mm
|
SB
mm
|
A
mm
|
nmax
min-1 | Z | QAL |
ID
LH / bottom
|
ID
RH / top
|
|---|---|---|---|---|---|---|---|
125 | 130 | 26 | 12000 | 2 | HW-MF |
134500
available at short notice |
134501
available at short notice |
125 | 150 | 26 | 12000 | 2 | HW-MF | ||
125 | 166 | 26 | 12000 | 2 | HW-MF |
134504
available at short notice |
134505
available at short notice |
125 | 180 | 26 | 12000 | 2 | HW-MF | ||
125 | 210 | 26 | 12000 | 2 | HW-MF | ||
125 | 236 | 26 | 12000 | 2 | HW-MF |
134510
available at short notice |
134511
available at short notice |
125 | 270 | 26 | 8000 | 2 | HW-MF | ||
125 | 310 | 26 | 8000 | 2 | HW-MF | ||
125 | 130 | 26 | 12000 | 4 | HW-MF |
134600
available at short notice |
134601
available at short notice |
125 | 150 | 26 | 12000 | 4 | HW-MF | ||
125 | 166 | 26 | 12000 | 4 | HW-MF |
134604
available at short notice |
134605
available at short notice |
125 | 180 | 26 | 12000 | 4 | HW-MF | ||
125 | 210 | 26 | 12000 | 4 | HW-MF | ||
125 | 236 | 26 | 12000 | 4 | HW-MF |
134610
available at short notice |
134611
available at short notice |
125 | 270 | 26 | 8000 | 4 | HW-MF | ||
125 | 310 | 26 | 8000 | 4 | HW-MF |
Further dimensions and inch dimensions on request.
Spare knives (HS/HW-MF/HW-RipTec) see section Knives and Spare Parts.
- D: Diameter
- SB: Cutting width
- A: Dimension A
- nmax: Maximum RPM
- Z: Number of teeth
- QAL: Cutting material