- Measurement:
DP:180x63x35 DKN,Z6x6
- Application:
For tear-free jointing with and against feed (e.g. jump cutting).
- Machine:
Edgebanding machines and double-end tenoners.
- Workpiece material:
Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).
- Technical information:
Tool with large, alternate shear angle for tear-free edges and straight jointed edge. 4.0 mm resharpening area.
Attribute | Value |
---|---|
Classification | WF 230 2 |
Product type | Cutter with bore |
Cutting material | DP |
Diameter (mm) | 180 |
Cutting width (mm) | 63 |
Thickness of hub (mm) | 46 |
Bore diameter / interface (mm) | 35 DKN |
Position of hub | 3 |
Number of teeth | 6x7 |
Workpiece material | Plastics Board, coated Board, uncoated Composites |
Maximum RPM (min-1) | 9500 |
Type | AS |
Rotation | RH |
Make of machine | Homag, IMA |
Recommended feed rate for 6000 min-1 for veneered or coated particle and fibre materials.
Z=4 25 m min-1
Z=6 35 m min-1
Z=8 45 m min-1
Z=10 55 m min-1
Z=12 65 m min-1
Z=14 80 m min-1