Leitz ProfilCut Q PLUS

Reduce your production costs sustainably

In cases where high running meter performances are required, the use of conventional tooling systems can result in high cost. ProfilCut Q PLUS sustainably reduces manufacturing costs with resharpenable, constant diameter and profile cutting edges. Especially for plants with a high output of parts, this system offers more efficiency and productivity while saving resources.

0
Tool lives per knife
0 %
Costs per running meter through resharpenable cutting edges
0 %
Higher productivity with ProfilCut Q PLUS Premium
YOUR BENEFITS
  • 5 times resharpenable
  • Constant profile and diameter after sharpening
  • Reduced processing times with maximum performance
  • Minimal set-up times

 

AT A GLANCE
  • ProfilCut Q PLUS for cutting speeds (vc) up to 90 m/s
  • ProfilCut Q PLUS Premium for cutting speeds (vc) up to 120 m/s
  • Tool body mainly of light metal
  • Includes Data Matrix Code or RFID chip for networked communication

  • Specially suitable for systems with high output

  • TC cutting edges with Marathon high-performance coating

 

Your benefits due to ...

Efficiency & Productivity

Reduces the production costs significantly

Efficiency & Productivity

Reduces the production costs significantly

  • Reduced tool costs due to six tool lives per knife

  • Maximum cost efficiency through the flexible use of disposable or resharpenable constant diameter systems

  • 50 % higher feed rate by increasing the cutting speed to 120 m/s

  • 20 % higher part output by reducing the cutting time

  • Shorter set-up times through automatic knife positioning without setting devices

  • Cost-efficient through the combination of several types of knives such as turnblades, profile cutting edges, edge rounders, spurs etc.

Reliability

Consistent quality and maximum user-friendliness

Reliability

Consistent quality and maximum user-friendliness

  • Constant profile and diameter after sharpening
  • Perfect repeatability after every knife service through precise, automatic knife clamping

  • Knife change possible in mounted tool set

Sustainability

Protects man, material and machine

Sustainability

Protects man, material and machine

  • Up to 8 dB(A) less noise through optimized tool design

  • Reduced knife consumption due to longer lifetime of the cutting edges

  • Highest wear protection and reduced dirt adhesion through functional coating

  • Protection of resources through reusable tool bodies


Downloads

pdf
ProfilCut Q PLUS
Type: Product information
Category: Profile tooling systems
Division Profiling Tools
Product management
+49 (0) 7364 950 662
Leitzstraße 2
73447 Oberkochen
Germany
Recommend this page