- Measurement:
DP, 125x63x30 DKN8x38 Z3
- Application:
For tear-free and noise reduced jointing of workpiece cutting surfaces with and against feed (jump cutting) particularly for sensitive decorative papers, foil coatings and veneers.
- Machine:
Edgebanding machines, copy shaping machines, double-end tenoners etc.
- Workpiece material:
Chip and fibre boards (MDF etc.) raw, veneered, painted and coated; especially for plastic, paper, HPL and anti-fingerprint coatings. Also suitable for surfaces in mat, high gloss or with relief structures.
- Technical information:
DP tipped cutterhead with alternate shear angle for tear-free jointing edges and cutting surface. Increased shear angle for excellent edge quality on sensitive decorative papers, foil coatings and veneers. Tool with knife arrangement S can be used lefthand and righthand and produces a hollow cut for tightly fitting edgebanding. Noise reduced design with up to 5 dB(A) noise reduction and highly efficient chip collection (>95%) through DFC. Significant weight reduction by using an aluminium alloy tool body. Carrier body for multiple use with exchangeable knives. 0.6 mm resharpening area.
Attribute | Value |
---|---|
Classification | WM 230 2 01 |
Product type | Cutter with bore |
Cutting material | DP |
Diameter (mm) | 125 |
Cutting width (mm) | 63 |
Thickness of hub (mm) | 40 |
Bore diameter / interface (mm) | 30 DKN |
Position of hub | 3 |
Number of teeth | 3x8 |
Workpiece material | Plastics Board, coated Board, uncoated Composites |
Maximum RPM (min-1) | 13700 |
Type | AS |
Rotation | RH |
Make of machine | IMA |
Stock availability | available from stock |