Jointing cutter DFC Diamaster PRO
ID: 090852
- Measurement:
DP:180x34x35,Z4/4/4,DKN,RH
- Application:
For tear-free jointing with and against feed (e.g. jump cutting).
- Machine:
Edgebanding machines and double-end tenoners.
- Workpiece material:
Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).
- Technical information:
Tool with alternate shear angle for tear-free edges and jointed edge. Low noise design with noise reduction of up to 5 dB(A) and efficient chip clearance (>95%). 1.5 mm resharpening area.
Attribute | Value |
---|---|
Classification | WF 230 2 DP |
Product type | Cutter with bore |
Cutting material | DP |
Diameter (mm) | 180 |
Cutting width (mm) | 32 |
Thickness of hub (mm) | 42 |
Bore diameter / interface (mm) | 35 DKN |
Maximum bore diameter (mm) | 40 |
Position of hub | 1 |
Number of teeth | 4x3 |
Workpiece material | Plastics Board, coated Board, uncoated Composites |
Maximum RPM (min-1) | 9500 |
Type | AS |
Rotation | RH |
Make of machine | Homag, IMA |
Plastics
Board, coated
Board, uncoated
Composites
available from stock
available at short notice