For tear-free jointing with and against feed (e.g. jump cutting).
Edgebanding machines and double-end tenoners.
Chip and fibre board (MDF etc.) uncoated, veneered, plastic and paper coated, fibre reinforced plastics (GFRP, CFRP etc.).
Tool with large, alternate shear angle for tear-free edges and straight jointed edge. 4.0 mm resharpening area.
Cutting width (mm)
Thickness of hub (mm)
Bore diameter / interface (mm)
Maximum bore diameter (mm)
Position of hub
Number of teeth
Maximum RPM (min-1)
Make of machine
Recommended feed rate for 6000 min-1 for veneered or coated particle and fibre materials.Z=4 25 m min-1Z=6 35 m min-1Z=8 45 m min-1Z=10 55 m min-1Z=12 65 m min-1Z=14 80 m min-1