Reducing sleeve with collar
ID: 028210
- Measurement:
70/50x24x35
- Application:
Reducing sleeve with/without flange for cutting tools and tool sets for use on spindles of various diameters.
- Machine:
Spindle moulders, plug cutters etc.
- Technical information:
The length of the reducing sleeve should be approximately 2 mm shorter than the width of the hub or the total height of the tool/tool set.
For safety reasons, the use of reducing sleeves should be avoided if possible.
Attribute | Value |
---|---|
Classification | TB 200 0 |
Product type | Clamping sleeve / Quick clamping element |
Clamping diameter (mm) | 50 |
Total length (mm) | 24 |
Length (mm) | 18 |
Cutting length (mm) | 18 |
Thickness of hub (mm) | 24 |
Bore diameter / interface (mm) | 35 |
Thickness of shoulder (mm) | 6 |
Diameter of shoulder (mm) | 70 |
Stock availability | available from stock |
available from stock
available at short notice