- Application:
For jointing and bevelling with adjustable bevel angle.
- Machine:
Spindle moulders, moulders, edgebanding machines and double-end tenoners.
- Workpiece material:
Hardwood, chip and fibre board (chipboard, MDF, HDF etc.), plastic coated, veneered etc., laminated veneer lumber (plywood, multiplex plywood etc.), solid surface material (e.g. Corian®, Varicor® etc.), fibre reinforced plastics (e.g. GRP, CFRP).
- Technical information:
Knife holder swivelling adjustable from 0 - 65°. Quick and easy angle adjustment of common angles (15°, 30°, 45°, 60°) by additional locking positions in 15° steps. Workpiece edges tear-free on both sides due to alternatinv shear angles. Economical due to partial change of diamond cutting edges. Noice reduced design with optimized gullet design for improved chip removal.
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- BOmax: Maximum bore diameter
- n: RPM
- Z: Number of teeth
Spare knives:
| Ersatzteil Nr. | BEZ |
ABM
mm
| ID |
|---|---|---|---|
1 | WhisperCut-knife SB14 | 14x14.2x4.3 |
091074
available from stock |
| Ersatzteil Nr. | BEZ |
ABM
mm
| ID |
|---|---|---|---|
2 | Countersink screw, Torx® 20/59° | M5x11.5 |
007899
available from stock |
Torx® key | Torx® 20 |
006091
available from stock | |
Allen key | SW 8, L 100 |
005437
available from stock |