- Application:
To trim edgebandings on horizontal spindles or for bevelling with inclined spindles.
- Machine:
Single or double-sided edgebanding machines.
- Workpiece material:
Plastic, softwood, hardwood and veneer edgebander.
- Technical information:
HW/DP tipped tools designed for systems for controlled chip collection (i-System, ED-System) for highly efficient chip collection (approx. 97%) with reduced energy consumption for extraction. Clean workpieces, no interference with scanning aggregates and less rework. High concentricity.
Machine |
D
mm
|
SB
mm
|
BO
mm
| Z | QAL |
ID
LH
|
ID
RH
|
---|---|---|---|---|---|---|---|
Homag, IMA | 70 | 8 | HSK 25 R | 4 | DP |
198472
available from stock |
198473
available from stock |
Homag, IMA | 70 | 8 | HSK 25 R | 6 | DP |
198474
available from stock |
198475
available from stock |
Homag, IMA | 70 | 8 | HSK 25 R | 8 | DP |
198404
available from stock |
198405
available from stock |
Homag, IMA | 70 | 15 | HSK 25 R | 4 | DP |
198406
available from stock |
198407
available from stock |
Homag, IMA | 70 | 15 | HSK 25 R | 6 | DP |
198468
available from stock |
198469
available from stock |
Homag, IMA | 70 | 25 | HSK 25 R | 4 | HW |
073092
available from stock |
073093
available from stock |
SCM | 80 | 8 | HSK 25 R | 4 | DP |
192335
available from stock |
192336
available from stock |
SCM | 80 | 30 | HSK 25 R | 4 | HW |
182001
available from stock |
182002
available from stock |
Recommended number of teeth:
Feed rates of up to 35 m min-1 Z 4
Feed rates of up to 60 m min-1 Z 6
Feed rates of up to 100 m min-1 Z 8 (thin edge)
- Machine: Make of machine
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- Z: Number of teeth
- QAL: Cutting material