- Application:
For a choice of radii and bevels on edgebandings. Corner rounding on leading and trailing edges and radius/bevel on top/bottom edges.
- Machine:
IMA edgebanding machine with KFA aggregates.
- Workpiece material:
Plastic, softwood, hardwood and veneer edgebander.
- Technical information:
DP tipped tools with HSK 25 R adaptor and special extraction hood i-System for highly efficient chip collection (approx. 97%) with reduced extraction energy consumption. Clean workpieces, no interference with scanning aggregates and less rework. Constant diameters. Low noise.
| Machine |
D
mm
|
B
mm
|
BO
mm
| Z |
R
mm
|
FAW
°
|
ID
LH
|
ID
RH
|
|---|---|---|---|---|---|---|---|---|
IMA Multiprofiler | 75 | 30 | HSK 25 R | 6 | 1/2/3 | 15° |
091916
available from stock |
091917
available from stock |
IMA Multiprofiler | 75 | 30 | HSK 25 R | 6 | 1/1,5/2 | 20° |
091922
available from stock |
091923
available from stock |
IMA Multiprofiler KFA | 75 | 28 | HSK 25 R | 6 | 1/2/3 | 15° |
091912
available from stock |
091913
available from stock |
IMA Multiprofiler KFA | 75 | 28 | HSK 25 R | 6 | 1/1,5/2 | 20° |
091924
available from stock |
091925
available from stock |
IMA Multiprofiler KFA | 75 | 28 | HSK 25 R | 6 | 1/2/3 | 45° |
091926
available from stock |
091927
available from stock |
Alternative multi-profile trimming heads with different dimensions can be supplied at short notice on request.
- Machine: Make of machine
- D: Diameter
- B: Width
- BO: Bore diameter / interface
- Z: Number of teeth
- R: Radius
- FAW: Bevel angle