- Application:
For multi-profile cutting with radii and bevelling of edges. Combination of two profiles for automatic profile resetting in the workpiece gap.
- Machine:
Homag edgebanding machines with cutting unit type FK11, FK20, FK21, FF12, FF32, PF21 with flexTrim cutting head.
- Workpiece material:
Plastic, softwood, hardwood and veneer edgebander.
- Technical information:
Two profiles in one tool. DFC design for efficient chip collection. Maximum processing quality through high running accuracy and smooth running. D0 = constant reference diameter, RPM nmax = 18000 min-1. It is recommended to have individual tools changed by the Leitz tool service.
Machine |
D
mm
|
D0
mm
|
NH
mm
|
BO
mm
| Z | QAL |
R
mm
|
FAW
°
|
ID
LH
|
ID
RH
|
---|---|---|---|---|---|---|---|---|---|---|
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 1,5/1,0 |
194300
available from stock |
194301
available from stock | |
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 2,0/1,0 |
194302
available from stock |
194303
available from stock | |
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 2,0/1,5 |
194304
available from stock |
194305
available from stock | |
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 3,0/2,0 |
194306
available from stock |
194307
available from stock | |
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 2,0 | 20 |
194308
available from stock |
194309
available from stock |
Homag | 78 | 70 | 19,5 | HSK 25 R | 4 | DP | 2,0 | 45 |
194310
available from stock |
194311
available from stock |
Tool 1 fix + tool 2 flexible
All tools and further profile variants available in various dimensions from blank at short notice. Further combinations possible on request.
- Machine: Make of machine
- D: Diameter
- D0: Zero diameter
- NH: Zero height
- BO: Bore diameter / interface
- Z: Number of teeth
- QAL: Cutting material
- R: Radius
- FAW: Bevel angle
Ersatzteil Nr. | Tool no. | BEZ |
ABM
mm
| ID |
---|---|---|---|---|
3 | 2 | O-Ring | 40x1.78 NBR70 |
118300
available from stock |