- Application:
For hogging along and across grain with/without scoring sawblade.
- Machine:
Sizing station in production lines.
- Workpiece material:
Chip and fibre boards (MDF etc.) uncoated, veneered, plastic coated.
- Technical information:
Cut edge quality of the trim and finish cuts is defined by the sawblades. Set assembled with finish cut, trim sawblade and twelve tungsten carbide tipped segments. Staggered cut by twelve hogging segment. The hogger is mounted directly on the motor spindle without flanged sleeve.
- Machine: Make of machine
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- Z/ZFSawblade: Z/ZF Sawblade
- QAL: Cutting material
available from stock
available at short notice
Spare parts:
Ersatzteil Nr. | BEZ |
ABM
mm
| Z | ZF | QAL | BEM | ID |
---|---|---|---|---|---|---|---|
Basic hogger | 340x34,5x30 | 12x7 | FZ | HW |
064448
| ||
Basic hogger | 340x34,5x30 | 12x7 | FZ | HW |
064449
| ||
Hogging segment | D 300/340 | 7 | FZ | HW |
064970
available from stock | ||
Hogging segment | D 300/340 | 7 | FZ | HW |
064971
available from stock | ||
1 | Countersink screw, Torx® 20 | M6x16 | Torx® 20 |
006086
available from stock | |||
2 | Cylindrical screw with ISK | M8x35 | for D = 305, 350 |
005874
available from stock |