- Application:
Pre-planing, surface cutting of all types of wood with large chip removal. Finish cutting of gluable surfaces and workpieces with secondary quality demands.
- Machine:
Four-sided moulders and profile machines.
- Workpiece material:
Softwood and hardwood.
- Technical information:
Pre-planing cutterhead with 4-time HW turnblades. Low noise and energy efficient through spiral, segmented edge arrangement. Plane surfaces through radiused cutting edges. Tool bodies of lightweight aluminium with integrated hydro clamping system. Activated by a grease gun.
D
mm
|
SB
mm
|
BO
mm
| Z |
nmax
min-1 | ID |
---|---|---|---|---|---|
160 | 150 | 50 | 4/4 | 11000 | |
160 | 180 | 50 | 4/4 | 11000 | |
160 | 200 | 50 | 4/4 | 11000 | |
160 | 230 | 50 | 4/4 | 11000 | |
160 | 310 | 50 | 4/4 | 11000 | |
200 | 150 | 50 | 6/6 | 8000 | |
200 | 180 | 50 | 6/6 | 8000 | |
200 | 200 | 50 | 6/6 | 8000 | |
200 | 230 | 50 | 6/6 | 8000 | |
200 | 310 | 50 | 6/6 | 8000 | |
250 | 150 | 50 | 8/8 | 6900 | |
250 | 180 | 50 | 8/8 | 6900 | |
250 | 200 | 50 | 8/8 | 6900 | |
250 | 230 | 50 | 8/8 | 6900 | |
250 | 310 | 50 | 8/8 | 6900 |
Design in steel/lightweight aluminium on request. This version combines the advantages of a light weight tool and a wear resistant knife seating and gullet area.
- D: Diameter
- SB: Cutting width
- BO: Bore diameter / interface
- Z: Number of teeth
- nmax: Maximum RPM
BEZ |
ABM
mm
| ID |
---|---|---|
Countersink screw, Torx® 20 | M5x14.2-8.8 |
007394
available from stock |
Torx® key | Torx® 20 |
006091
available from stock |